08 June 2024 - 14 June 2024

Table of Contents

1. MIT OCW

1.1. 18.06sc (Linear Algebra)

1.1.1. Unit II: Eigenvalues and Eigenvectors

2. SJ grounds

Weed pulling

3. SCZ Front Step

3.1. Finished Test piece left side fitting, started right side

4. Andromeda Path analysis

4.1. Initial path complete.

4.2. Continuing "fun" reconciling EDD catalog with GAIA DR3

4.2.1. Distance modulus data more or less matches

4.2.2. Studying refinement of DR3 parallax conversion

A lot more complicated! Gaiasky has bayesian path database.

4.2.3. Initial "two step path" to M31

Now it's a physics problem of whether any constructed artifact can traverse 700 kiloparsecs.

5. John Ralston

Planning visit to Mount Hope Cemetary in Pescadero where Great-great-great-grandfather on the Kelley side is buried.

6. Spacewire-like PHY

Poking that this long-standing problem. Building infrastructure to test if it's possible to construct a PHY layer with acceptable BER to 50 MBit which should be sufficient for 32 16-bit channels at 48 KHz sample rate. Need to re-establish EDA workflow.

7. EDA workflow

7.1. kicad

Spacewire-like PHY with LVDS and XOR gates.

7.2. FPGA programming

7.2.1. lattice workfow refinement (testbenches)

7.2.2. simple interconnect circuit in test

7.3. RIOS OS

7.3.1. Nucleo boards build fine

7.3.2. Arduino Uno builds fine

7.3.3. Some difficulty getting SPI on F767ZI to work but now resolved

8. Reading

9. CA Root Key Generation

Nice to have an appliance that manages keys. Need to make this simple. Really don't have time for a science project. Too, bad, though. It kind of is a science project. Could just buy something from nitrokey https://www.nitrokey.com/ but I really don't want to spend money on it of I have hardware already. Looking at nitrokey in more detail, it doesn't seem to be any simpler than what I'm doing already.

9.1. First pass done

9.1.1. Based on https://pki-tutorial.readthedocs.io/en/latest/simple/

Interesting that the certs generated fail with openssl sserver testing because the cryptographic algorithms are too weak.

9.1.2. Work continues

  1. Have an outline with ECDSA/NIST-384
  2. Have consolidated configuration across CAs.
  3. Trying to decide if/how to deal with revocation. What a PITA.

9.2. Need to be clear on security properties.

Definitely protect against remote access to private keys. How strong does the protection against local access need to be?

9.3. Simple hardware.

9.3.1. Use beagleboard with local interface

9.3.2. Use some modern device TPM

Need to export data for backup.

9.3.3. Or something that uses PKCS11 interface

9.4. USB Serial interface only but no credentials across USB I/F.

But this potentially exposes the hardware to remote access via the USB I/F when connected.

9.5. Use Sneakernet

Doesn't scale. Should use something so cert updates are automatable. But that's a science project it seems.

10. Compilers

10.1. Compiled Wikipedia PL/0 example

10.2. Work out overall plan.

Lots of moving pieces.

10.3. Looking into LLVM MLIR.

Will not use immediately, but perhaps trend in that direction.

10.4. ASDL

10.4.1. current smlnj C++ implementation incomplete

10.4.2. old versions asdl source fail to build with new versions of smlnj

10.4.3. old versions of smlnj not easily buildable on x8664

10.4.4. ancient binary of asdl 1.2 compiler seems to work

but associated libraries are to old to link because of missing ctype symbol

10.4.5. analyzing asdl 1.2 generated code

Most of the code is for serialization, which is going to be replaced anyway, so can be removed by hand.

10.4.6. run in vm?

Analysis of binaries shows that it was built on some redhat os using gcc 2.8.1. Redhat-6.2? No. Tried various ancient Redhat OSs.

11. Piper dovecot

11.1. Update broke dovecot auth.

Looks PAM related, but PAM update failed to fix.

11.2. Set tuffy up as a staging server

So I don't debug on 'production'.

11.3. piper dovecot SSL certificate NOT broken

At least not obviously broken (yet). Further investigation needed.

12. Various i686

12.0.1. netbsd

was installed. But needed the box for something else.

12.0.2. buildroot

builds complete.

13. piper

13.1. dovecot

13.1.1. Raising apparmor error.

Not sure how to resolve.

13.2. pidgeonhole

13.2.1. procmail replacement.

13.2.2. Considering integration.

13.3. httpd

13.3.1. Still stable.

But seems to occassionally mis-serve files.

13.4. SSL cert

Trying letsencrypt with certbot. http problem above may be interfering.

13.5. redmine

Still not sure I want to go down this rabbit hole.

13.6. openvpn

Need to consider cert construction.

14. Buffalo WZR-HP-G300NH

14.1. Update

Sometime next year.

15. SJC weather station

15.1. Proper enclosure mostly constructed

15.1.1. Needs a redo on bottom plate

15.1.2. Seems to have improved wireless connectivity somewhat

16. opencl

16.1. Studying. Have some examples working.

16.2. Need to look at arrayfire as an alternative.

16.3. This is a bit of a hammer looking for a nail.

17. EPLDH

17.1. MPFI interval arithmetic better alternative

18. wktpqb

18.1. needs a new approach

18.2. Verifying edge construction (con't.)

18.3. 'gcd' algorithm doesn't work

19. Mill Controller #2

19.1. Mounted on mill - ready or testing

19.2. Need to investigate new HW/SW for eventual replacements

19.2.1. Old crap ain't gonna last forever

19.2.2. Buildroot/Linux 5.15 PREEMPT + latency tools

First pass done - boots on real hardware

19.3. Alternative architecture

19.3.1. Split off stepper motor controller to separate board

Increase latency tolerance on controller

19.3.2. Use emc2 MODBUS/TCP protocol for stepper and other IO

20. Alum Rock Data Center

20.1. May have problem with network power module.

It's only 30 years old or something like that.

20.2. Added Ethernet card to tuffy

Preparing as backup/staging server.

20.3. Need a VPS with static IP

Just use dynamic interface to bind.

21. Virtual Orchestra

21.1. sfz file tests

21.1.1. need tooling to edit sample files

21.2. increasingly skeptical whether quality results are possible

21.3. maybe should treat as platform for concatinative synthesis

21.4. maybe should just accept the limitations and work with it

One should not be disappointed that a guitar can't sound like a flute.

22. gat

22.1. spectrogram done - matches 'octave' output

23. RIOT drivers

Implemented - needs testing.

23.1. WS2801

23.2. Velleman KA03

23.3. Velleman KA05

24. mcd05 32 button/led box

24.1. Recovered schematics.

24.2. Planning software.

24.3. Received STM32F767 Nucleo144 with Ethernet.

24.3.1. Test program running.

24.3.2. Need to consider CoAP multicast discovery.

24.3.3. Consider simpler architecture with STM32F767 as a 'hub'.

24.3.4. Consider CAN interface to hub.

25. AMD 2900 bitslice computing

25.1. Probably my oldest uncompleted project

25.2. Exploring possibilities for something constructive

Create verilog models for 2903/2910 and verify against hardware?

26. Hitachi HD68B09E CPU

26.1. RAM/UART/IO

26.2. Started schematic

26.2.1. Standard peripheral set for 8 bit CPU bringups

Board schematic planned - need Kicad symbols

26.3. Arduino Mega 2560 DMA loader

…Along with standard 8 bit loader

26.4. Generate quadrature clock directly

26.5. Full Bus SW Emulation infeasible

6809 1000ns maximum cycle time too short

27. Rockwell R65F11

27.1. Still evaluating.

27.2. Dev board

Reverse engineered some of a mostly fully built development board with one part missing. As near as I can tell, that one part is some sort of programmable address decoder with a pinout that does not correspond to any part I can find. Kind of like a GAL but with inputs on top and outputs on bottom (as opposed to left and right in a standard GAL). I have no idea what the provenance of this board is and if it ever worked.

28. PLD programming

Looks like Atmel 16V8 is the last 5V PLD part left standing. Maybe not surprising that there still doesn't appear to be a fully open source tool chain for programming. How hard could it be? (!) Could next-pnr generic help? Might be easier to use espresso for logic array and program output logic bits directly for simple stuff.

29. EPROM Programming

Found some software for Needham programmer. Need to check electrolytic caps on ISA board.

30. POSIT

30.1. Use POSITs for YRX?

No. Existing library is fine.

31. MAME

31.1. Subset builds in debug mode

Full debug fails - not enough disk or memory.

31.2. gs6809 serial IO doesn't work right with PTY and other streams

31.3. ampro (Z80/Z80SIO) does work with PTY

31.4. Evaluating what is needed for other emulators.

32. More project ideas

32.1. Zuse Z3 simulation in Verilog

Good excuse for floating point ALU design. Try posit format?

32.2. GMPForth ports to simulators

32.2.1. SIMH for some targets (vax)

32.2.2. MAME looks interesting for microprocessor system emulations

How to support ersatz systems?

32.2.3. Ports to classic figFORTH targets

32.3. GMPASM assembler

May be useful for handbuilt and rare systems (DMX1000?).

32.4. Extracting ISO Superboard Forth ROMS for MAME emulation

32.5. 'bwocl' OpenCL tooling

32.5.1. Offline compilation

32.5.2. Standard Kernel Running

32.6. hardware support for classic 5V CPUs

32.6.1. RTX2000, CDP1802 still available!

32.6.2. 6502, 68000, 320C30, others on hand

32.6.3. CPUs with totally async bus may be supportable without RAM

32.6.4. Could use small footprint monitor in asm (gmpmon?)

32.7. Existing 'retro' hardware still working?

32.7.1. OSI Superboard

Unknown. Composite to VGA adapter didn't seem to work. Needs analysis. Found OSI model 610 board underneath!

32.7.2. Super Jolt

No output. Needs analysis.

32.7.3. Ampro Little Board

Not booting. Needs analysis.

32.7.4. Rockwell R65F11 Demo board

UART sending "NO ROM" at 2400 7N1 as expected with 2MHz xtal. MAME emulator possibilities?

32.7.5. NMIX-0016

Works. Found original prom in a parts stash(!).

33. David Davies

33.1. Broadcom (BCG?) Employee indicted for running a brothel.

33.2. New case C1923172, consolidated with 15 Parties.

33.3. Court website no longer allows seaching (grrr!)

Author: Daniel Kelley

Created: 2024-06-22 Sat 04:57

Validate